To Fax Using Chain Dial - Konica Minolta bizhub 162 Facsimile Manual

3

To fax using chain dial

Faxes can be sent to recipients that are specified using any combination of
one-touch dial keys, speed dial numbers, direct input using the 10-key pad,
and the [Redial] key.
As an example, the following procedure describes how to specify recipients
using one-touch keys, then using the 10-key pad.
1
Press the [Speaker] key.
2
Press the desired one-touch key,
and then press the [Start] key.
3
After the message
UP
enter the recipient's fax number.
4
After the message
UP
the automatic document feeder.
5
Press the [Start] key.
Do you want to stop the fax transmission?
?
% Press the [Stop] key, and then press the [Yes] key when the next
screen appears.
3-8
SET DOC. FACE
appears, use the 10-key pad to
SET DOC. FACE
appears, load the document into
Faxing
Fax kit FK-505