Communication Settings; Selecting The Comm. Setting Menu - Konica Minolta bizhub 162 Facsimile Manual

Using the utility mode
5.7

Communication settings

From the COMM.SETTING menu, various functions are available for specify-
ing communication settings.
No. Name
1 TONE/PULSE
2 LINE MONITOR
3 PSTN/PBX
The utility mode settings can also be specified from LSD (Local Setup for Di-
agnostic). For details, refer to "About Local Setup for Diagnostic (LSD)" on
page 7-11.
If optional network interface card NC-502 and scanner unit SU-502 are in-
stalled, settings can also be specified from the network tool PageScope Web
Connection. For details, refer to "What is PageScope Web Connection?" on
page 7-6.

Selecting the COMM. SETTING menu

1
Press the [Utility] key ten times.
COMM. SETTING
2
From the 10-key pad, press the key
([1] through [3]) for the communica-
tion setting function that you wish to
set.
The communication setting functions
are as follows:
1 TONE/PULSE
2 LINE MONITOR
3 PSTN/PBX
Fax kit FK-505
Characteristic/Description
This function can be used to specify the dialing system. If this
function is not correctly set to the type of dialing system used,
faxes cannot be sent. Select the correct setting after checking
which type of dialing system is used by your telephone line.
This function can be used to set the volume when monitoring
communication to HIGH, LOW or OFF.
• Default setting: LOW.
This function can be used to set whether the connected telephone
wiring is a public switched telephone network (PSTN) or a private
branch exchange (PBX).
For a PBX system, the outside line access number (or extension
number) must be specified.
appears.
5
5-59