Specifying Forward - Konica Minolta bizhub 160f User Manual

Using the utility mode

Specifying FORWARD

1
Select the
ERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select
ON,
press the [Yes] key.
– If
ed, a screen appears, allowing you to specify the forwarding loca-
tion. (Continue with step 4.)
– If
3
Using the one-touch dial keys or the
speed dial numbers, or by entering
the fax number using the 10-key pad,
specify a fax number, and then press
the [Yes] key.
The RX OPERATION menu appears again.
Note
An e-mail address can be specified as a forwarding location only when
the optional scanner unit SU-502 is installed.
For details, refer to the user manual for the scanner unit SU-502.
bizhub 160f
FORWARD in the RX OP-
ON(PRINT) or OFF, and then
ON or ON(PRINT)
OFF was selected, the RX OPERATION menu appears again.
was select-
7
7-67