Specifying Tone/Pulse; To Specify The Telephone Dialing System - Konica Minolta bizhub 162 Facsimile Manual

5
Note
If, at any time, you wish to quit setting/changing an comm. setting func-
tion, press the [No/C] key. When the message
press the [Yes] key to quit.
To exit the COMM. SETTING menu, press the [Panel reset] key. The main
screen appears again.

Specifying TONE/PULSE

There are two types of telephone dialing systems: tone dialing (PB) and pulse
dialing (DP10pps or DP20pps). Faxes cannot be sent if this machine is not
set to the system used by your telephone line. Select the correct setting after
checking which type of dialing system is used.

To specify the telephone dialing system

1
Select the
COMM. SETTING menu.
For details, refer to page 5-59.
2
Press the [*] and [)] keys to select
either
PULSE
press the [Yes] key.
3
If
PULSE
10pps
[Yes] key.
The COMM.SETTING menu appears
again.
5-60
TONE/PULSE
(for tone dialing) or
TONE
(for pulse dialing), and then
was selected, select either
or 20pps, and then press the
STOP SETTING?
in the
Using the utility mode
appears,
Fax kit FK-505