To Specify The Resolution - Konica Minolta bizhub 162 Facsimile Manual

Faxing

To specify the resolution

1
Press the [Fax] key to enter fax mode.
The fax screen appears.
2
Position the document.
3
Press the [Resolution] key on the
control panel to select the resolution
mode.
4
Using the [*] and [)] keys, select the
fax resolution, and then press the
[Yes] key.
– If
select STD,
Note
Depending on the recipient's fax machine, faxes sent with the Super fine
or Super fine+ Half tone setting may not be sent as specified, and instead
are sent with the Fine or Half tone setting.
If the Half tone or Super fine + Half tone setting is specified, the fax may
be sent with a decreased resolution depending on the quality of the re-
cipient's fax machine or whether the document size is larger than the pa-
per loaded in the recipient's fax machine.
Fax kit FK-505
(Half tone) was selected,
H/T
or
FINE
in the next screen.
S/F
3
3-15