Specifying The Setting For "Forward - Konica Minolta 7416MFG Advanced Information

Using the Utility Mode

Specifying the Setting for "FORWARD"

1
Select the "RX OPERATION".
H
Refer to "Selecting the "RX OPERATION" menu" on page 7-62.
2
Press the [6] key from the 10-Key
Pad to select "FORWARD".
3
Using the [ ] and [ ] keys, select
"ON", "ON(PRINT)" or "OFF", and
then press the [Yes] key.
H
If "ON" or "ON(PRINT)" was
selected, a screen appears, allowing you to specify the forwarding
location. (Continue with step 4.)
H
If "OFF" was selected, the "RX OPERATION" menu appears
again.
4
Using the one-touch dial keys or the
speed dial numbers, or by entering
the fax number using the 10-Key
Pad, specify a fax number, and then
press the [Yes] key.
The "RX OPERATION" menu appears again.
Tip
An e-mail address can be specified as a forwarding location only when
the optional Internet Fax & Network Scan Kit is installed.
For details, refer to the User Manual for the Internet Fax & Network
Scan Kit (IF-118).
7416MFG
Ö
Ö
7
7-67