Basic Faxing; To Fax Using The Automatic Document Feeder - Konica Minolta bizhub 162 Facsimile Manual

3
3.3

Basic faxing

To fax using the automatic document feeder

1
Press the [Fax] key to enter fax
mode.
The fax screen appears.
2
Load the document face up into the
automatic document feeder.
3
Adjust the document guide plates to
fit the size of the document
4
If necessary, change the resolution
setting (p. 3-15).
5
Using the 10-key pad, enter the fax
number of the recipient.
– The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing" on page 3-3.
6
Press the [Start] key to begin scanning and sending the fax.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 3-24).
Do you want to stop the transmission?
?
% To stop the transmission, press the [Stop] key.
Do you want to cancel a scanned document queued for transmis-
?
sion or a fax waiting to be redialed?
% Select
3-16
CANCEL RESERV.
from the "FUNCTION" menu (p. 4-21).
Faxing
Fax kit FK-505