Specifying Memory Rx Mode - Konica Minolta bizhub 162 Facsimile Manual

Using the utility mode

Specifying MEMORY RX MODE

1
Select the
the RX OPERATION menu.
For details, refer to page 5-52.
2
Press the [*] and [)] keys to select
ON, and then press the [Yes] key.
3
Using the 10-key pad, enter the time
for memory reception to begin, and
then press the [Yes] key.
– To specify that memory reception
stays on from the time that it is set to
celed, press the [Yes] key without entering a start time. (Skip to step
5.)
4
Using the 10-key pad, enter the time
for memory reception to end, and
then press the [Yes] key.
5
Using the 10-key pad, enter the 4-
digit password used to cancel mem-
ory reception, and then press the
[Yes] key.
– If no password is to be specified, press the [Yes] key without enter-
ing anything.
The RX OPERATION menu appears again.
Fax kit FK-505
MEMORY RX MODE
in
ON until it is manually can-
5
5-53