Table of Contents
Advertisement
System settings
The following base station settings can only
be made using a registered Gigaset C28H
handset.
Protecting against unauthorized
access
Protect the system settings of the base sta-
tion with a PIN known only to you. The sys-
tem PIN must be entered when registering/
de-registering a handset with/from the base
station.
Changing the system PIN
You can change the 4-digit system PIN set on
the base station (default setting: 0000) to a
4-digit PIN known only to you.
Caution:
Do not forget the new system PIN! If you forget it,
you must reset your phone to the default settings
(see "Restoring the default settings" on page 33).
¢
¢
§Menu§
Settings
PIN
~
Enter the old PIN and press
~
Enter the new PIN and press
~
To confirm, enter the new PIN
again and press
Settings for connecting the base
station to the PABX
The following settings are only needed
when your PABX requires them. Please refer
to the user guide of your PABX.
Changing the dialing mode
The following dialing modes can be
selected:
u
Tone dialing (DTMF)
u
Pulse dialing (DP)
¢
¢
§Menu§
Settings
¢
¢
Dialling Mode
Tone / Pulse
Select the dialing mode and
§OK§
press
¢
System
Change
§OK§
§OK§
§OK§
.
System
Line 1 / Line 2
.
Setting the flash time
¢
§Menu§
Settings
¢
Line 1 / Line 2
Short / Medium / Long
Select the flash time (Short =
100 ms, Medium = 280 ms,
Long = 600 ms) and press
Switching temporarily to tone dialing
(DTMF)
If your PABX still operates with pulse dialing
(DP), but you need tone dialing (DTMF) for a
connection (for example to listen to the
voice mailbox), you must switch to tone dial-
ing for the call.
Requirement: You are conducting a call or
have already dialed an external number.
¢
§Menu§
Tone Dialling
§OK§
Press the display key to confirm.
Tone dialing is now activated for this call
only.
Restoring the default
settings
.
.
You can restore the default values for most
settings. When resetting, all handsets
remain registered and the directory will not
be deleted.
¤
Perform the following on a registered
Gigaset C28H handset!
¢
§Menu§
Settings
§OK§
Press the display key to confirm
reset.
System settings
¢
¢
System
Recall
§OK§
¢
¢
System
Reset
.
33
Advertisement
Table of Contents
