Table of Contents
Advertisement
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
System settings
Step
by
Step
Configuring music-on-hold
The caller hears music-on-hold when put on hold by the base station rather
than the exchange (e.g. in the case of internal transfer). The following settings
can be selected:
Internal
Off
Press
1.
2.
Select using [ ] and [OK]:
Music on Hold
Select using [ ] and [OK]: required type.
3.
This feature is also available when a call is held via 2 B-channels, see section
"Conducting a call externally or via a second B-channel" on page 23.
Audio settings
With this setting you can define a ringer melody for each MSN, valid for all
called handsets. Independent of this setting, you can also select a different
ringer melody for the handset for internal calls.
Assigning a ringer melody to an MSN
Each newly assigned MSN is automatically assigned its own ringer melody.
This setting enables you to change the type of melody.
Press
1.
Select using [ ] and [OK]: Service Set up
2.
Set up MSN .
Select using [ ] and [
3.
Select using [ ] and [OK] : Ringer Melody .
4.
Select using [
5.
Configuring an internal ringer melody for a handset
Press
1.
Select using [ ] and [OK] : Settings
2.
Select using [
3.
self and played back directly – confirm your selection with [OK].
Integrated default melody
Music-on-hold via connection 21 or 22. This menu item only ap-
pears if "Ext. music/hold" is selected when the device type is set
to connection 21 or 22.
for selection menus.
Service Set up
.
for selection menus.
] : (required MSN) .
] or [
] one melody from 0 to 9 and confirm with [OK].
for selection menus.
] or [
] one melody – this melody is generated in the handset
giga3070KAP .fm
System settings
Settings
System settings
Settings
ISDN settings
Audio
Ringer Melody .
09.01.01
25
Advertisement
Table of Contents
