Checking The Front Brake Pads And Rear Brake Shoes; Checking The Brake Fluid Level - Yamaha Neo's 4 2018 Owner's Manual

Checking the front brake pads
and rear brake shoes
The front brake pads and the rear
brake shoes must be checked for wear
at the intervals specified in the periodic
maintenance and lubrication chart.
Front brake pads
Check the lining thickness of each
brake pad. If less than specified, have
the brake pads replaced as a set.
1. Lining thickness
Minimum lining thickness:
3.1 mm (0.12 in)
Periodic maintenance and adjustment
EAU22382
Rear brake shoes
EAUM4000
1. Wear indicator
2. Wear limit line
The rear brake is provided with a wear
indicator, which allows you to check
the brake shoe wear without having to
disassemble the brake. To check the
brake shoe wear, check the position of
the wear indicator while applying the
brake. If a brake shoe has worn to the
point that the wear indicator reaches
the wear limit mark, have a Yamaha
dealer replace the brake shoes as a
set.
EAU43171

Checking the brake fluid level

Before riding, check that the brake fluid
is above the minimum level mark.
Check the brake fluid level with the top
of the reservoir level. Replenish the
brake fluid if necessary.
1. Minimum level mark
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
6-18
Specified brake fluid:
DOT 4
WARNING
EAU32346
6
EWA15991