Connecting The Base To A Pabx; Saving An Access Code (Outside Line Code); Setting Pauses - Siemens Gigaset DL500A User Manual

Connecting the base to a PABX

Connecting the base to
a PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Please note
u
You cannot send or receive SMS mes-
sages on PABXs that do not support
Calling Line Identification.
Saving an access code
(outside line code)
Prerequisite: You must enter an access code
for external calls using your PABX, e.g., "0".
¢ Ï ¢
v
Telephony
¤
You can enter data in the following fields:
Access external line with:
enter or change the access code, max.
three digits.
For:
Call Lists
The access code is put in front of numbers
dialled on the base or a handset from one
of the following lists:
– The SMS list
– The accepted calls list
– In the missed calls list
– An answering machine list
All Calls
The access code prefixes all numbers
dialled on the base or a handset.
Off
The access code is deactivated. It does
not prefix any phone number.
§Save§
Press the display key.
Please note
The access code never prefixes any emer-
gency numbers or SMS service centre
numbers.
96
¢
Access Code

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between picking up the receiver
c and sending the number.
v
Open the main menu.
*#Q5# L
Press keys in sequence.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs;
3 = 7 secs) and press
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys in sequence.
~
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
Changing a dialling pause (pause
after access code)
v
Open the main menu.
*#Q5#
Press keys in sequence.
~
Enter a digit for the length of
the pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 6 sec.) and
§OK§
press
Inserting a dialling pause:
¤
Assign the function Insert P
¢
( page 84) to one of the programma-
ble keys.
¤
When entering the phone number, at the
point at which a dialling pause is to be
inserted, press and hold this function key
until a P appears in the display (approx.
2 seconds).
§OK§
.
§OK§
.
.