Table of Contents
Advertisement
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate a fault.
Checking service information
If you contact Customer Services, you may
need the base's service information.
Prerequisite:
You must pick up the receiver when in idle
mode or be conducting an external call.
Please note
You may need to wait a few seconds before
§Options§
appears on the display
¢
§Options§
Service Info
Confirm selection with
You can select the following information/
functions with q:
1:
Base serial number (RFPI)
2:
Not in use: - - -
3:
Informs the service employees
of the base settings (in hex dia-
gram format) e.g., the number
of registered handsets, repeater
mode.
4:
Variant (digits 1 to 4),
Telephone firmware version
(digits 5 to 6).
5:
Not relevant
6:
Device number of the base. This
contains additional information
for the service employee.
Authorisation
This device is designed for the analogic tele-
phone connection in the greek telephone
net.
Gigaset Communications GmbH hereby
declares that the phone described in this
user guide is in compliance with the
essential requirements and other relevant
provisions of European Directive 1999/5/EC
(R&TTE).
If you require a copy of the original, visit the
website:
www.gigaset.com/docs
§OK§
.
Customer Service & Assistance
101
Advertisement
Table of Contents
