Connecting The Base Station To The Pabx; Dialing Modes And Setting Flash Duration; Setting Pauses; Switching Temporarily To Touch-Tone Dialing (Dtmf) - Siemens Gigaset SL785 User Manual

Connecting the base station to the PABX

Connecting the base
station to the PABX
The following settings are only necessary
when your PABX requires them; see the PABX
user guide.
Dialing modes and setting

Flash Duration

The current setting is indicated by
Changing the dialing mode
The following dialing modes can be
selected:
u
Touch-tone dialing (DTMF)
u
Pulse dialing
Ï
¢ ¢
v
Telephony
Mode
s
Select dialing mode and press
Ø
§Select§
(
Setting Flash Duration
Your phone is preset at the factory for oper-
ation on the main connection. For operation
on a PABX, you may have to change this
value. Please refer to the user guide for your
PABX.
Ï
¢ ¢
v
Telephony
Duration
s
Select duration and press
Ø
( = set value). Possible values
are: 80 ms, 100 ms, 120 ms, 180
ms, 250 ms, 300 ms, 600 ms, 800
ms.
58
Ø
.
¢
Dialing
= selected).
¢
Flash
§Select§

Setting pauses

Changing pause after line seizure
You can change the length of the pause
inserted between pressing the Talk key c
and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter digit for the pause length
(1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)
and press
Changing the pause after the Flash
key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys.
~
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
Switching temporarily to
touch-tone dialing (DTMF)
If your PABX still operates with pulse dialing
(DP), but you need touch-tone dialing
(DTMF) for a connection (e.g., to listen to the
.
network mailbox), you must switch to touch-
tone dialing for the call.
Requirement: You are conducting a call or
have already dialed an external number.
*
Press the Asterisk key.
After the call has ended, pulse dialing is
automatically reactivated.
§OK§
.
§OK§
.