Internal Call - Siemens Gigaset DL500A User Manual

Transferring a call to a handset
You can transfer an external call to a handset
(connect).
Prerequisite: You are conducting an exter-
nal call.
u
Open the list of handsets.
The external participant hears
music on hold, if activated
¢
( page
If more than one handset is registered:
s
Select a handset or Call All and
§OK§
press
When the internal participant answers:
¤
If necessary, announce the external call.
& / T
Replace the receiver or press the
red end key.
The external call is transferred to the other
handset.
If the internal participant does not answer or
the line is busy, press the display key
return to the external call.
You can also replace the receiver before the
internal participant picks up when transfer-
ring the call.
Then, if the internal participant does not
answer or the line is busy, the call will auto-
matically return to you.
Initiating an internal consultation
call/conference
When you are conducting an external call,
you can call an internal participant at the
same time for consultation or hold a confer-
ence call between all three participants.
You are conducting an external call:
u
Open the list of handsets.
The external participant hears
music on hold, if activated
¢
( page
s
If more than one handset is reg-
istered: select the handset and
§OK§
press
You are connected to the internal partici-
pant.
89).
.
§End§
, to
89).
.
Connecting/using other devices
Either:
¢
§Options§
End Active Call
You are reconnected with the
external participant.
Or:
§Conf.§
Press the display key.
All three participants are con-
nected with each other.
If the internal participant does not answer:
¤
Press the display key
first external caller.
Ending a conference call
An internal participant pressing the end call
key (on the handset) or the red end key
does not affect the connection between the
other internal participant and the external
participant.
External call waiting during an

internal call

If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number
appears in the display if Calling Line Identifi-
cation is enabled.
You have the following options:
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off.
You remain connected with the internal
participant.
The call continues to be signalled on other
registered handsets.
Accepting an external call/Putting an
internal party on hold
§Accept§
Press the display key.
You are connected to the external caller.
The internal call is placed on hold.
You have the following options:
u
Swap between both participants:
¤
Use q to swap between the partici-
pants.
§End§
to return to the
T
75