Table of Contents
Advertisement
Setting up the base
The type of info service available to your
base is set on the Internet on the
Gigaset.net server. You can change the
settings via your PC web browser
(see user guide for the Web configurator;
Info Services).
If no information is currently available,
the digital time (Digital Clock) is dis-
played instead until information is availa-
ble again.
Together with the information, display
keys that open the Info Centre selection
menu can be shown.
The screensaver replaces the idle status dis-
play. It will conceal the calendar, date, time
and name.
The screensaver is not displayed in certain
situations e.g., during a call and when a sta-
tus message is displayed.
If a screensaver is activated, the Screensaver
menu option is marked with ³.
¢
¢
Ï Settings
v
¢
Screensaver
The current setting is displayed.
¤
You can enter data in the following fields:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
Selection:
Select screensaver with r or
§View§
Press the display key. The active
screensaver is displayed.
s
Select screensaver and
§OK§
press
§Save§
Press the display key.
The screensaver is activated approx. 10 sec-
onds after the display has changed to idle
status.
If the screensaver conceals the display,
briefly press the red end key
the idle display.
86
Display
.
T
to show
Activating/deactivating the info
ticker
You can display text information from the
Internet (weather information etc.) that is set
for the screensaver Info Services as a scroll-
ing message in the idle display. The scrolling
message is shown in the bottom line of the
idle display (immediately above the display
keys). The end of one set of information and
beginning of the next are separated by
"+++".
If, for example, you have set the calendar to
be shown in the idle display, the information
ticker overwrites the last two lines (weeks) of
the calendar.
¢
Ï Settings
¢
v
¢
Info Ticker (³= on)
The ticker starts as soon as the telephone
changes to idle status. If, however, a mes-
sage is shown in the idle display, the infor-
mation ticker is not displayed.
Setting the brightness and time
control for the display backlight
You can set the brightness of the display on
your base and specify a timeframe during
which the display is completely deactivated
e.g., at night.
If the display backlight is deactivated, it can
be reactivated by pressing any key or by an
incoming call. The display backlight is deac-
tivated again after approx. 30 seconds after
the last press of a key.
¢
Ï Settings
¢
v
¢
Backlight
The current setting is displayed.
Display
Display
Advertisement
Table of Contents
