Rear Panel - Strong SRT 8300 CI User Manual

PART 1 • English

2.2 Rear Panel

1. ANT IN
To connect the antenna cable to this connector.
2. TO TV
Gives you the possibility to connect an extra terrestrial receiver.
3. TV SCART Connector
Use this connector to connect your receiver with your TV set using a SCART cable.
4. DVD/ VCR SCART
Use this connector to connect your receiver to your video recorder using a SCART cable.
When receiver in stand-by mode a video/audio signals from your VCR will be looped through
receiver to your TV set.
5. Y, Pb, Pr
Connects to Component jack of TV.
6. VIDEO
This connector has a constant video signal for additional VCR-connections.
7. Audio L/R
Outputs for Audio Left (White) and Right (RED).
8. S/PDIF Coax and Optical
Output for connecting to a digital audio amplifier.
9. HDMI
Connects to HDMI jack of TV.
10. RS-232 Serial Port
This serial port can be used to connect your PC to your receiver to download new software
versions to your receiver.
11. USB
Connects to USB device.
12. Power ON/OFF Switch
Powers on/off.
13. Power Cord
Your receiver requires a current of 90 ~ 240 V AC (Auto-selectable), 50 ~ 60 Hz ±- 5%.
Make sure to check the power specification before connecting your receiver to the wall outlet.
5