Connecting To Digital Audio Amplifier; Connecting To Computer By Serial Cable - Strong SRT 8300 CI User Manual

PART 1 • English
Connecting by SCART cables
1. Connect the TV SCART connector at the back of the receiver to the SCART IN connector on
your TV set or connect Video RCA and Audio L/R RCA connectors at the back of the receiver
to corresponded inputs on your TV set.
2. Connect the VCR SCART connector of the receiver to the SCART-IN connector on your VCR set.
Note: Please, make sure that your receiver is connected by SCART or 3 RCA cable (Video,
Audio L/R) to your TV set when you connect your VCR (or DVD) to receiver. You will not
get video signal from your VCR (DVD) through the receiver if your receiver is connected
only by HDMI or YPbPr connector to your TV set.
3.3 Connecting to Digital Audio Amplifier
Connect S/PDIF connector at the back of your receiver to appropriated input of your Digital Audio Amplifier.

3.4 Connecting to computer by serial cable

Connect the RS-232 connector on the back of your receiver to the Serial port of your computer using a
serial cable. Instructions how to download software can be found on our website www.strong.tv (support
> download). However, this receiver can download new system software from USB stick.
Fig. 4
Fig. 3
9