Terrestrial Search; Installation - Strong SRT 8300 CI User Manual

PART 1 • English
button again. Channel(s) will be deleted after you press BLUE button. Be aware: after pressing BLUE button
channel(s) will be deleted from all channel lists. To cancel delete operation you can press EXIT button.
Message "Do you want to save?" will appear on screen. Press EXIT to cancel or OK to confirm.

5.2 Terrestrial Search

The Terrestrial Search menu contains following sub-menus: "Channel Setup" and "Terrestrial Settings"
In first order make sure that Terrestrial settings are correct and corresponds to the country where you leave.
5.2.1 Channel set-up
There are 2 possible ways of terrestrial channel search: Auto Scan (RED button) and Manual Scan
(GREEN button).
Manual Search
n
Select one or several frequencies by OK button then Manual Scan (GREEN button) to search for
channels on selected frequencies.
AutoScan
n
Press Auto Scan (RED) to scan all frequencies in the list.
On completing the search, the receiver will save automatically the services information.
5.2.2 Terrestrial settings
Use pqtu buttons to select your Country, Antenna Supply and Channel Numbering.
Country:
n
Antenna Supply:
n
Channel Numbering:
n

5.3 Installation

5.3.1 Preference
In this menu, you can set up your personal preferences.
OSD language, Audio language, Subtitle language
n
Use pqtu buttons select the item and OK button to display the list.
Banner Timeout
n
To set banner duration (how long information banner will be displayed on screen).
Use pqtu buttons select the item and OK button to display the list.
Transparency
n
Use pqtu buttons to select the transparency level and OK button to display the list.
CAM messages
n
To enable or disable displaying of messages from Conditional Access Module. Disabling of CAM
messages could be necessary in order to not disturb you while zapping through channels which
can't be descrambled by your smart card.
With OK you can open the list to select your home country.
Select this option to ON in case you use active antenna powered
through coaxial cable. The receiver supply DC power +5 V into 50 mA
load maximum.
select this option to "Operator defined" in case your operator provide
logical channel numbering feature. Otherwise select "Appearing order".
13