Troubleshooting - Strong SRT 8300 CI User Manual

6.4.2 Play
Press u (PLAY) button in TV mode and the Recording File List will appear on screen.
Select with the pq buttons the file you want to watch and start playback by pressing OK.
You can activate Fast Forward or Fast Rewind during playback by pressing the
pressing of these buttons will change the speed (FF: x2, x4, x8; FR: x1, x2, x4, x8). Press u (PLAY) button
to continue playback at desired position.
To choose a specific position or scene in the playback press INFO and select the desired position with
the tu buttons.
To stop the playback press ■ (STOP) button.
6.4.3 Timeshift:
Make sure that in PDR menu the Timeshift function is set to ON. This can be adjusted in "Application" >
"PDR" menu.
Press II (PAUSE) button in TV mode to start Timeshift. The Recording Info banner appears and shows
the recorded time.
To continue watching the programme press u (PLAY) button.
If you start Timeshift during recording the receiver keeps recording.
You can activate Fast Forward or Fast Rewind during Timeshift by pressing the
pressing of these buttons will change the speed (FF: x2, x4, x8; FR: x1, x2, x4, x8).
To choose a specific position or scene in Timeshift mode press INFO and choose the desired position
with the tu buttons.
To leave TimeShift press ■ (STOP) button.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact the
dealer. Don't open the receiver cover. This may cause a dangerous situation and will void the warranty.
Symptom
The 4 digits display on
front panel does not
light up.
No picture or sound
20
Cause
The power cord is not plugged
in.
Wrong connection of the Audio/
Video output of the receiver
to TV.
Audio muting.
TV power off.
or
or
Remedy
Check that the power cord is plugged
in to the wall outlet. Make sure power
switch on rear panel is in ON position.
Connect the Audio/Video output of the
receiver to TV correctly.
Press the MUTE button
Turn TV on.
PART 1 • English
button. Another
buttons. Another