Specifications - Strong SRT 8300 CI User Manual

PART 1 • English
Symptom
No picture
The remote control does
not work
A.2 SPECIFICATIONS
Demodulator DVB-T
Modulation:
Demodulation:
IF bandwidth:
Guard Interval:
Code rate:
Video Decoder
Profile Level:
Input Rate:
Aspect Ratio:
Frame Rate:
Video Resolution:
Audio Decoder
Audio Decoding:
Audio Mode:
Frequency Response:
Sampling Rate:
Cause
The receiver can't receive the
signal
Incorrect values of channel
parameters.
You have switched to a Radio
channel
The batteries of the remote
control are not inserted or
exhausted
COFDM
QSPK, 16-QAM / 64-QAM
6, 7 or 8 Mhz
1/4, 1/8 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Max. 90 Mbit/s
4:3, 16:9, Pan & Scan, Letterbox
25 Hz for PAL, 30 Hz for NTSC
576p, 720p, 1080i
MPEG-1 Layer 1 & 2, Dolby Downmix
Mono L/R, Stereo, AC3
20 Hz ~ 20 kHz, < ± 2 dB
60 Hz ~ 18 kHz, < ± 0.5 dB
32, 44.1, 48 kHz
Remedy
Check the antenna cable, replace the
cable, or connect the cable to the
receiver tightly.
Set the values channel parameters
correctly in installation menu.
Press TV/Radio to get back to TV
channels.
Check whether the batteries are inserted
correctly in your remote control. Check
the batteries, and if exhausted replace
the batteries in the remote control.
21