Connections; Connecting To Terrestrial Antenna; Connecting To Tv & Vcr - Strong SRT 8300 CI User Manual

3.0 CONNECTIONS

3.1 Connecting to Terrestrial antenna

To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver
3.2 Connecting to TV & VCR
Connecting by HDMI cable
To fully enjoy your HDTV channels it is advisable to use HDMI or Component video outputs of your receiver.
Connect one end of HDMI cable to the HDMI output of your receiver and another end of cable to
HDMI IN connector on your TV.
Connecting to component output
1. Make sure to use proper cable (3 RCA on each side of cable, usually coloured as GREEN,
BLUE, RED).
2. Connect chinches at one side of the cable to Y, Pb, Pr (GREEN, BLUE, RED) outputs on your
receiver and another side of the cable to corresponded inputs on your TV. Very important to
follow colour mark.
8
PART 1 • English
Fig. 3