Using The Remote Control; Batteries; Range Of Operation - Strong SRT 6500 User Manual

PART 1 English
l

5.0 USING THE REMOTE CONTROL

5.1 Batteries

How to insert the batteries
Open the cover at the top of the rear side of the handset
n
Insert two "AAA" type batteries (1.5V), respecting the indicated polarity +/- signs
n
Close the cover
n
When to replace the batteries
When the operational range of the handset gets smaller, or when the receiver no longer responds to each and every command. Always
n
replace both batteries at the same time
Accident prevention
Do not recharge, heat or disassemble the batteries
n
Make sure the intended polarity alignment is respected
n
If the handset is not going to be used for some time, take the batteries out. If not, the batteries may leak and cause damage to
n
the handset

5.2 Range Of Operation

The operating range of the handset is within +/- 30 degrees on both the vertical and horizontal planes of the Infra Red sensor
n
Transmission distance does not exceed 7m
n
Notes
When the handset is not operational
Replace the batteries and make sure the receiver is connected to the power supply.
Abnormal operation
Disturbance from peripheral devices may occur. You will need to move the object that is generating the disturbance.
Notes for handling
In the event the receiver is exposed to heat or water, operating it could be dangerous. Have the unit checked by a qualified technician
prior to operating it again.
7