Strong SRT 6500 User Manual page 17

8.2.3.2 How to add new transponder
Set "Tune method" to "TP" or "TP+NIT"
n
Move focus to "Frequency" and enter value in MHz
n
Move focus to "Symbol rate" and enter value in kSPS
n
Move focus to "Polarity" and select value
n
Move focus to "FEC" and select value or set "Auto"
n
Move focus to "Function" select "Append" and press OK. Message "Saving data..." will be shown on screen. New transponder will be
n
added to the end of the list
8.2.3.3 How to delete present transponder
Set "Tune method" to "TP" or "TP+NIT"
n
Move focus to "Transponder" and choose transponder you want to delete
n
Move focus to "Function" select "Delete" and press OK. Message "Saving data..." will be shown on screen. Selected transponder deleted
n
from the list
8.2.3.4 How to correct/edit parameters of the transponder
Set "Tune method" to "TP" or "TP+NIT"
n
Move focus to "Transponder" and choose transponder you want to modify
n
Move focus to "Frequency" and enter value in MHz
n
Move focus to "Symbol rate" and enter value in kSPS
n
Move focus to "Polarity" and select value
n
Move focus to "FEC" and select value or set "Auto"
n
Move focus to "Function" select "Change" and press OK. Message "Saving data..." will be shown on screen. Modified data are stored in
n
the memory
Press EXIT to go back to the previous mode
n
8.2.4 Setup Lock/PIN
Press OK on 'Setup Lock/PIN' in the Setup Menu. The following window will appear. Set the Menu Lock, Change the PIN, enter the New PIN and
confirm the Confirm PIN.
Use CH p/q to move up and down the list
n
Use Vol t/u to change the setting
n
Press EXIT to go back to the previous mode
n
16
Menu Lock: On/Off
Change PIN: Press OK if you want to change.
New PIN: Enter your new 4-digit code
Confirm PIN: Confirm your new 4-digit code
Note: The default PIN is '1234'
PART 1 English
l