Channel Search - Strong SRT 6500 User Manual

PART 1 English
l

8.2.3 Channel Search

Press OK on 'Channel Search' in the Setup Menu. The following window will appear.
Set the Satellite, Tune Method, Transponder, Frequency, Symbol Rate, FEC and Function.
Use CH p/q to move up and down the list
n
Use Vol t/u to change the setting
n
Sub options are:
Transponder: Select index from the stored list
Frequency: Value of transponder frequency in MHz
Symbol Rate: Value of symbol rate in kSymbols Per Second
Polarity: Horizontal / Vertical / Right / Left
FEC: Auto, 1/2, 2/3, 3/4, 5/6, 7/8
Function: Append / Delete / Change
AGC Signal: Indicates received signal strength level
8.2.3.1 How to search for channels
Highlight "Tune method" field and press OK. Receiver will start channel scan. Names of the found channels will be shown in the two columns:
for TV and Radio separately.
You can interrupt search process by pressing to OK or EXIT button.
If you press OK button: search process will be interrupted and you can select one of the following options:
Save – to save all found channels
n
Unselect – to unselect some unwanted channels from the list. Use OK button to unselect channels and Vol t/u buttons to switch
n
between TV and Radio list. Once you finish – press EXIT button, select "Save" and press OK. Only selected channels will be stored in
the memory
Cancel – to cancel result of search. No channels will be stored in the memory
n
If you press EXIT button: search process will be interrupted and no channels stored in the memory.
Satellite Name: Choose from the list of satellites selected in
"Antenna setup" menu
Tune Method: Main options are:
"Sat" – receiver will search channels according to stored list of transponders.
"Sat – NIT" - receiver will search channels according to stored list of
transponders and in addition use network information. This mode allows you to
find all channels, even from new appeared transponders.
"TP" – this method is to search channels from one transponder.
"TP – NIT" – receiver will search channels from one transponder and in addition
use network information. This mode recommended if you want to search
channels of particular broadcaster only
"Free" – receiver will search only Free To Air channels
"Free+Scr" – receiver will search for all channels
15