Tightening Torques - SMART ebike Owner's Manual

Tightening torques

72
Tightening torques
G
WARNING
Bolts or nuts which have been tightened using the incorrect torque:
may come loose if the torque is too low
R
may be overstretched if the torque is too high and consequently break off
R
A torque that is too high may also damage the components. There is a risk of an accident.
Always tighten the bolts and nuts to the specified torque. If you do not own a torque wrench,
have this work carried out at a qualified specialist workshop.
Rear wheel
Axle nut
Dropouts
Brake system
Brake disc (steel) to wheel flange
Brake calliper to frame/fork
Brake lever
Brake pad retaining pin
Saddle
Seatpost clamp
Saddle to seat post
Drive
Pulley at pedal crank
Drive belt guide
Inner bearing
Pedal at bottom bracket spindle
Pedal, left (left-hand thread)
Pedal, right (right-hand thread)
Tightening torque
40 Nm (29.50 lb-ft)
22 Nm (16.23 lb-ft)
Tightening torque
4 Nm (2.95 lb-ft)
6 Nm (4.43 lb-ft)
3 Nm (2.21 lb-ft)
2.5 Nm (1.84 lb-ft)
Tightening torque
9 Nm (6.64 lb-ft)
12 Nm (8.85 lb-ft)
Tightening torque
4 Nm (2.95 lb-ft)
6 Nm (4.43 lb-ft)
30 Nm (22.13 lb-ft)
34 - 44 Nm (25.08 - 32.45 lb-ft)
20 Nm (14.75 lb-ft)
20 Nm (14.75 lb-ft)