Mounting - SMART ebike Owner's Manual

ebike with direction of travel to the right
Dropouts
:
Axle nut, right
;
Catch
=
Gear cable
?
i
Observe the instructions on handling
Y
the drive belt ( page 43)
X
Remove the battery (
X
Engage first gear (
X
Press catch = and detach gear cable ?.
ebike with direction of travel to the left
Data cable connector
A
Power cable connector
B
Axle nut, left
C
X
If necessary, allow the components to
cool down.
X
Detach data cable connector A.
X
Detach power cable connector B.
X
Loosen axle nuts ; and C (wrench size
15 mm (0.59 in)).
Y
page 41).
Y
page 29).
Removing/mounting the rear wheel
X
Hold rear wheel in place, lift the ebike
by the saddle.
The rear wheel slides out of dropouts :
X
Carefully remove the drive belt from the
pulley.
X
Set the rear wheel aside, ensuring that it
cannot fall over.
X
Slide the yellow transport lock between
the brake pads.
Mounting the rear wheel
ebike with direction of travel to the right
ebike with direction of travel to the left
Dropout, right
:
Washer with anti-twist lock (right)
;
Axle nut, right
=
Belt pulley, rear wheel
?
Dropout, left
A
Axle nut, left
B
Torque support
C
Washer (left)
D
59
Z