Maximum; Inner Tubes; Weights; Approved - SMART ebike Owner's Manual

Technical data ebike
70
Useful information
i
This Owner's Manual describes all mod-
els and all standard and optional equip-
ment available for your ebike at the time
of publication of the Owner's Manual.
Country-specific differences are possi-
ble. Note that your ebike may not be fit-
ted with all features described. This is
also the case for systems and functions
relevant to safety.
i
Read the information on qualified spe-
cialist workshops: (
Tyres and wheels
Tyres
The approved tyres have been specially
designed for pedelecs. The use of any other
type of tyre may result in increased rolling
resistance and consequently in a reduced
range. Furthermore, handling character-
istics, resistance to flats and noise may be
adversely affected.
Therefore, when replacing the tyres,
ensure that the new tyres are of the same
type and size with a suitable tread. If in
doubt, contact your nearest smart dealer.
The reflective strips on the tyre sidewalls
replace the spoke reflectors in accordance
with legal requirements.
Observe the direction of rotation when fit-
ting a tyre. An arrow on the tyre sidewall
indicates the direction of rotation.
Further information on tyres and wheels
can be found in the "Operation" section
Y
( page 44).
Y
page 10).
Tyres and inner tubes
Approved tyres
Front and rear wheel
Tyres
ETRTO dimensions
Dimensions in
inches
Suitable inner tube
Front and rear wheel
Valve
ETRTO dimensions
Dimensions in
inches
Tyre pressure
! Observe the manufacturer's informa-
tion on the tyre sidewall regarding air
pressure. Exceeding the maximum per-
mitted air pressure level when inflating
the tyre may result in a tyre blow-out.
Continental EcoContact Plus 47-559
Front wheel
Rear wheel
Technical data ebike
i
The unladen weight given is for the
standard scope of delivery. Accessories
and items of optional equipment
increase the unladen weight and reduce
the maximum payload.
Continental Eco-
Contact Plus
47-559
26 x 1.75
Sclaverand
37/47-559/597
26 x 1 3/8 - 1.75
650 A/B
400 kPa (4.0 bar/
58 psi)
400 kPa (4.0 bar/
58 psi)