Removing/Mounting The Front Wheel - SMART ebike Owner's Manual

Problem
The gearshift shifts
down from second to
first of its own
accord.
It is not possible to
engage third gear.

Removing/mounting the front wheel

Removing the front wheel
! Hydraulic disc brakes must not be oper-
ated with the wheel removed. Otherwise,
the brake pistons will fully extend and
touch each other. After removing the
wheel, immediately push the yellow
transport lock between the brake pads.
Removing/mounting the front wheel
Possible causes/consequences and M Solutions
There is too much tension in the gear cable.
X
Reduce the tension of the gear cable at the twist-grip
Y
( page 61).
If the problem persists despite taking these measures:
X
Have the gearshift checked at a qualified specialist work-
shop.
There is too much tension in the gear cable.
X
Reduce the tension of the gear cable at the twist-grip
Y
( page 61).
There is too little tension in the gear cable.
X
Increase the tension of the gear cable at the twist-grip
Y
( page 61).
If the problem persists despite taking these measures:
X
Have the gearshift checked at a qualified specialist work-
shop.
Quick-release device open
Fork dropouts
:
Quick-release device
;
Hand lever
=
X
If necessary, allow the components to
cool down.
X
Open quick-release device ; by moving
hand lever =.
The word "OPEN" shows that quick-
release device ; has been released.
i
Retention tabs on the fork prevent the
front wheel from falling out uninten-
57
Z