Setting The Time; Daytime Driving Lights; Lighting System - SMART ebike Owner's Manual

Lighting system

26

Setting the time

Button Ü
:
Button f
;
Button g
=
CLOCK
display
?
Button î
A
X
Press button : and button A simulta-
neously.
CLOCK
and the time currently set are dis-
played; the hours will flash.
X
Press button ; or button = to set the
correct hour.
X
Press button : to change to the minutes.
X
Press button ; or button = to set the
correct minutes.
X
Press : to confirm.
The time is now stored.
Lighting system
Notes
Your ebike's lighting system will be
switched on automatically every time you
switch the system on (daytime driving
lights).
To increase safety, smart recommends that
you always ride with the lighting system
switched on. The LED lights consume min-
imum power and have almost no effect on the
range of your smart ebike.
Switching the lights off
Button Ü
:
X
When the system is switched on: press
button : for four seconds.
The lights and display lighting are
switched off.
i
When you switch off the system, the
lighting system will also switch off. If
you switch the system back on, the light-
ing system will also be switched back on.
Switching the lights on
Button Ü
:
Indicator lamp _
;
X
When the system is switched off: press
button : briefly.
The system is switched on. The lights and
display lighting are also switched on.
Indicator lamp ; appears in the dis-
play.