Checking The Charge Level Of The Bat- Tery; Battery Charge Level; Selecting The Drive/Generator Level - SMART ebike Owner's Manual

Checking the charge level of the bat-
tery
Checking the charge level on the con-
trol console
Charge indicator Z
:
When the system is switched on, the battery
symbol on charge indicator : shows how
much battery power is left.
If all the bars are visible, the battery is
100 % charged.
Checking the charge level directly on
the battery
Battery
:
Charging socket
;
X
Slowly slide your finger over charging
socket ; on battery :.
The LED ring around charging socket ;
lights up in colour.
i
The system does not have to be switched
on for this.

Selecting the drive/generator level

The colour of the LED ring indicates the

battery charge level:

LED ring colour
Green
Orange
Red
Selecting the drive/generator level
Selecting the drive level
G
WARNING
If pedal assist is activated on smooth or
slippery road surfaces, the rear wheel can
spin and lose grip when you accelerate.
There is a risk of an accident.
Always deactivate pedal assist on smooth or
slippery road surfaces.
Drive level 3 (example)
Drive level bar indicator
:
Button f
;
Button g
=
The drive level is used to select how much
power the electric drive should provide to
assist your own pedal power. You can select
between four drive levels.
X
To increase the drive level: press but-
ton ; on the control console.
A
will appear in the display. Bar indi-
cator : shows which drive level you have
selected. If you have already set a gen-
Charge level
100-85 %
85-25 %
< 25 %
Z
27