Wear - SMART ebike Owner's Manual

Printed Owner's Manual
The printed Owner's Manual (including any
Supplements) must be observed in addition
to this Owner's Manual.
There is no update to the electronic Own-
er's Manual on CD. Amendments are only
made by means of supplements to the prin-
ted Owner's Manual.
Equipment
This Owner's Manual describes all models
and all standard and optional equipment
available for your ebike at the time of pub-
lication of the Owner's Manual. Country-
specific differences are possible. Note
that your ebike may not be fitted with all
features described. This is also the case
for systems and functions relevant to
safety. Therefore, the equipment on your
ebike may differ from that in the descrip-
tions and illustrations. Should you have
any questions concerning equipment and
operation, please consult a smart dealer.
The following items are included in the
ebike scope of delivery:
charger
R
transport locks for the brake system
R
printed Owner's Manual
R
electronic Owner's Manual on CD
R
i
Keep the yellow transport locks for the
brake system. They are needed to check
the brake pad wear and are used as an aid
in various repair tasks.
The following accessories are available:
luggage carrier including net pockets
R
smartphone cradle
R
high handlebars
R
seat and seatpost variants
R
Operating safety
Important safety notes
G
WARNING
Components can be damaged without it
being visible on the surface:
in the event of an accident or fall
R
if the bike tips over
R
Components damaged in this way could fail
unexpectedly, for example:
the handlebars or the seat post could
R
break while you are riding the bike
the brakes could fail
R
There is a risk of accident and injury.
In this or similar cases, have the ebike
checked at a qualified specialist workshop
without delay.
G
WARNING
When being used, the mechanical compo-
nents of the ebike are subjected to high
loads and wear. Components react differ-
ently to these loads and show signs of fati-
gue or wear at different rates. If the oper-
ating life of a component is exceeded, the
component could suddenly fail. There is a
risk of accident and injury.
Have your ebike checked regularly at a
R
qualified specialist workshop.
Pay attention to any sign of cracks,
R
scratches or changes in colour. These
signs indicate that the component has
reached the end of its operating life.
Have components showing signs of wear or
R
fatigue replaced at a qualified special-
ist workshop.
The components affected are:
Handlebars and stem
R
Saddle and seat post
R
Frame and fork
R
Tyres and wheels
R
Pedals and pedal cranks
R
Brake pads and brake discs
R
>> Introduction.
Z
9