Table of Contents
Advertisement
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names INT 1,
INT 2 etc. Each handset will automatically be assigned the lowest unassigned internal number.
The internal number is shown as the name of the handset on the display e.g. INT 2. You can
change the names and the numbers of handsets. The name must not exceed 10 characters in
length.
¤
. . . the list of handsets is opened, the current handset is highlighted with <
use
to select a handset . . . possible options:
Edit name:
Edit number:
Repeater
A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
•
Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
•
Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤
. . . use
Range
Change (
Deactivate encryption
¤
. . . use
Change (
= deactivated)
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
¤
Options
name
. . . use
¤
Options
number
Save
to select
Settings
= activated)
to select
Settings
Rename
OK
. . . use
to enter a new name
Edit Handset No.
OK
OK
ECO DECT
No Radiation
Change (
OK
System
Press and hold the Registration/paging
Repeater
. . .
to delete the current
OK
. . . use
to select a
OK
Maximum
= deactivated)
OK
Encryption
57
Advertisement
Table of Contents
