Standard Cmos Setup Page - MATSONIC MS9087C Manual

Standard CMOS Setup Page

This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
System Time:
System Date:
Primary IDE Master : Auto
Primary IDE Slave : Auto
Secondary IDE Master : Auto
Secondary IDE Slave : Auto
Floppy Drive A : 1.44 MB 3 1/2
Floppy Drive B : Disabled
These items set up system date and time.
Date & Time
These items configure devices connected to
IDE
the Primary and Secondary IDE channels.
Primary Master
To configure an IDE hard disk drive, choose
Primary Slave
Secondary Master
Auto. If the Auto setting fails to find a hard
Secondary Slave
disk drive, set it to User, and then fill in the
hard disk characteristics (Size, Cyls, etc.)
manually. If you have a CD-ROM drive,
select the setting CDROM. If you have an
ATAPI device with removable media (e.g. a
ZIP drive or an LS-120), select Floptical.
These items set up size and capacity of the
Floppy Drive A
floppy diskette drive(s) installed in the
Floppy Drive B
system.
Standard CMOS Setup
00:02:01
Wed Jul 23, 2003
20
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system
time.