Rack Installation; Parts List - MAXDATA PLATINUM 500 I System Manual

5 Rack Installation

The PLATINUM 500 I is available with an optional slide rail kit for rack installation. The following
instructions apply to servers with this rack option only.

Parts List

The following is a list of all the parts that are relevant for installation; each part is designated with a
letter that is used in the installation guide.
External Rail
Middle Rail
/
NOTE
Countersunk screws are not required.
Tip: Customers with a MAXDATA rack can simplify installation of the server by taking the screws,
washers, and clamping nuts from the fastening set of their cabinet.
MAXDATA Server PLATINUM 500 I M7
Internal Rail
The middle rail (B) is slid
inside the external rail (A)
and the internal rail (C) in
turn is inside the middle rail
(B).
End Bracket
Round head screw, large
Round head screw, small
Nut
Perforated Plate with
threaded holes
7