Installation - MAXDATA PLATINUM 500 I System Manual

Installation

1. Pull the internal rail (C) out of the middle rail (B).
. Leave the middle rail (B) inside the external rail (A).
. Measure the distance between the front and rear breadboard section of your cabinet. At-tach
the silver end brackets (D) to the external rail (A) with two screws (E) and two nuts (G) each.
Be careful to make sure that the distance between the fastening bracket for the external rail
(A) and the end bracket (D) is the same as the distance between both bread-board sections of
your server cabinet.
8 8 Rack Installation Rack Installation