Technical Reference; Power Supply Specifications; 600 W Single Power Supply Input Voltages; Efficiency - MAXDATA PLATINUM 500 I System Manual

6 Technical Reference

Power Supply Specifications

600 W Single Power Supply Input Voltages

• 100–17 V~ at 50/60 Hz; 10 A max.
• 00–40 V~ at 50/60 Hz; 5 A max.

Efficiency

The following table illustrates the efficiency of the power supply.
Table 5. Efficiency of the 600 W power supply (FSP600‑80PSA)
Load (% of maximum)
Efficiency

600 W Single Power Supply Output Voltages

The table below lists the total wattage available for supplying power from the power subsystem for
each voltage.
Table 6. 600 W Power Supply Output Rating
Voltage
+3.3 V
+5 V
+5 V Standby
+12 V (4 power supply rails)
×12 V

650 W Redundant Power Supply Input Voltages

• 00–40 V~ at 50/60 Hz; 11 A max.

650 W Redundant Power Supply Output Voltages

The table below lists the total wattage available for supplying power from the power subsystem for
each voltage.
Table 7. 650 W Power Supply Output Rating
Voltage
+3.3 V
+5 V
+5 V Standby
+12 V (4 power supply rails)
×12 V
CAUTION
The expansion slots on the server board are rated for no more than 5 W for any one slot. The average
current usage per slot should not exceed 1 W.
MAXDATA Server PLATINUM 500 I M7
20% 50% 100%
82% 85% 82%
Maximum Current
25 A
25 A
3 A
48 A (18 A for a power supply rail)
0.5 A
Maximum Current
28 A
30 A
3 A
48 A (18 A for a power supply rail)
0.5 A
1