Connecting The System; Back Panel Connectors; Nic Leds - MAXDATA PLATINUM 500 I System Manual

Connecting the System

Back Panel Connectors

B D F H
A C E G
A. Status LED
B. System Identification LED
C. Diagnostic LED 7 (MSB LED)
D. Diagnostic LED 6
E. Diagnostic LED 5
F. Diagnostic LED 4
G. Diagnostic LED 3
The NIC LEDs at the right and left of each NIC provide the following information.
Table 1. NIC LEDs
LED LED State
Left Off
Solid Amber
Blinking Amber
Right Off
Solid Amber
Solid Green
6
J
I K
Figure 1. Back Panel Connectors
H. Diagnostic LED 2
I. Diagnostic LED 1
J. Diagnostic LED 0 (LSB LED)
K. Serial Port A
L. Video Port
M. NIC 1 (top, default management port),
two USB ports (bottom)
N. NIC 2 (top), two USB ports (bottom)
Description
No network connection
Network connection in place
Transmit/receive activity
10 Mbps connection (if left LED is on or
blinking)
100 Mbps connection
1000 Mbps connection
L M N
Setting up the System