Powering up the System
At the front of the case, you can find the neccessary controls like power button, reset button and the
HDD Leds. Press the power button one time briefly in order to boot the server.
A. Power LED
B.
HDD LED
C.
NIC2 LED
D. NIC1 LED
E.
Critical backplane temperature*
* Only for Platinum 500 with SAS / S-ATA backplane option. A critical tempera-
ture is signaled by the backplane via LED and at the same time by an acoustic
warning. This may hint at a fan failure.
MAXDATA Server PLATINUM 500 I M7
A
B
C
D
E
F
Figure 2. Front controls and indicators
F.
G.
H.
I.
G
H
I
Front USB ports
Power switch
Reset switch
Disable backplane alarm*
7