Opening The Processor Socket Lever; Opening Load Plate; Removing Protective Covering From The Load Plate; Inserting The Processor - MAXDATA PLATINUM 500 I System Manual

9. Push the rear tab with your fingertip to bring the front end of the load plate up slightly. Open
the load plate completely. See figure 15.
10. If there is a protective covering on the load plate, remove it and store it for later use.
Figure 16. Removing Protective Covering from the Load Plate
11. Take the processor out of the box and remove the protective shipping covering.
1. Align the processor with the socket in such a way that both notches match up with the
processor socket pins. Gently insert the processor into the socket.
0 0
Figure 14. Opening the Processor Socket Lever
Figure 15. Opening Load Plate
Figure 17. Inserting the Processor
Hardware Installations and Upgrades Hardware Installations and Upgrades