Removing Plastic Retention Device; Securing Hard Drive To Drive Cage; Inserting Drive Carrier Into Drive Cage - MAXDATA PLATINUM 500 I System Manual

. Slide the drive carrier out of the drive cage.
. Remove the four screws that secure the plastic retention device to the drive carrier. Remove
the plastic retention device.
4. Secure the hard drive to the drive carrier using the four screws that were formerly attached to
the plastic retention device. Ensure that the connector end of the hard drive is facing the back
of the drive carrier. The label side of the hard drive should be facing up in the drive carrier.
5. With the black lever open, insert the drive carrier into the drive cage. Once inserted, rotate the
black lever upwards to latch the drive carrier into position.
MAXDATA Server PLATINUM 500 I M7 MAXDATA Server PLATINUM 500 I M7
Figure 10. Removing Plastic Retention Device
Figure 11. Securing Hard Drive to Drive Cage
Figure 12. Inserting Drive Carrier into Drive Cage
17 17