Use Only For Intended Applications; Power And Electrical Warnings; Rack Mount Warnings - MAXDATA PLATINUM 1600 IR User Manual

Use Only for Intended Applications

This server was evaluated as Information Technology Equipment (I.T.E.) for use in offices, homes,
schools, computer rooms, and similar locations. The suitability of this product for other applications or
environments, (such as medical, industrial, alarm systems, test equipment, etc.) may require further
evaluation.

Power and Electrical Warnings

CAUTION
The power supply in this product contains no user-serviceable parts. Do not open the power supply.
Hazardous voltage, current and energy levels are present inside the power supply. Return to
manufacturer for servicing.
When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced
before removing it from the server.
To avoid risk of electric shock, turn off the server and disconnect the power cord, telecommunications
systems, networks, and modems attached to the server before opening it.
The power supply cord(s) is/are the main disconnect device to AC power. The socket outlet(s) must
be near the equipment and readily accessible for disconnection.
The power supply cord(s) must be plugged into socket-outlet(s) that is/are provided with a suitable
earth ground.

Rack Mount Warnings

The equipment rack must be anchored to an unmovable support to prevent it from tipping when a
server or piece of equipment is extended from it. The equipment rack must be installed according to
the rack manufacturer's instructions.
Install equipment in the rack from the bottom up, with the heaviest equipment at the bottom of the
rack.
Extend only one piece of equipment from the rack at a time.
You are responsible for installing a main power disconnect for the entire rack unit. This main disconnect
must be readily accessible, and it must be labeled as controlling power to the entire unit, not just to
the server(s).
To avoid risk of potential electric shock, a proper safety ground must be implemented for the rack
and each piece of equipment installed in it.
46 Regulatory and Integration Information