Scanning Photos (2) - Microtek ScanMaker s430 Supplement Manual

8 ScanMaker s430 Supplement

Scanning Photos (2)

1. Raise the scanner lid, and place the photo to be
scanned face down on the scanner glass surface.
Position the top end of the photo towards the
front of the scanner.
Place the White Mat that came with your scanner
on the top of the photo, then lower the scanner
lid on the scanner glass surface.
Note: For the automatic cropping feature to work correctly during the preview
scan of your photo, make sure the White Mat is placed on the top of the photo
before you launch ScanWizard 5.
2. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the
ScanWizard 5 Standard Control Panel.
When ScanWizard 5 launches, it automatically performs a image preview of the
material on your scanner glass surface and displays it in the preview area.
3. Click the Switch icon (
switch to the Advanced Control Panel.
4. Click the Overview button to perform a preliminary scan of the image, which will
appear in the Preview window.
5. In the preview window, you can resize the scan frame (floating dotted line) around
the image by dragging on the edge or corner of the scan frame to determine the
final size of the actual scan.
6. Specify your scanning requirements in the Settings window.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
7. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
8. If the colors in your photo are faded and need restoring, check the "Automatic
Color Restoration" box in the Settings window.
9. Click the Scan to button to scan the image.
) on the right corner of the Standard Control Panel to