For Pc Users Using Scanwizard Ez; Scanning Photos (1) - Microtek ScanMaker i450 Supplement Manual

For PC Users Using ScanWizard EZ

A. Scanning Photos (1)
This scenario uses the ScanWizard EZ - EZ
Mode.
1. Raise the scanner lid, and place the photo to be
scanned face down on the scanner glass surface.
Position the top end of the photo towards the
back of the scanner.
2. Place the Black Mat that came with your
scanner on top of the photo, then lower the
scanner lid on the scanner glass surface.
Note: Use of the Black Mat on top of your photo
filters out unwanted light during scanning, and
ensures the correct functioning of the automatic
cropping feature when you do a preview scan.
3. Double-click the ScanWizard EZ icon on your desktop to launch ScanWizard EZ.
When ScanWizard EZ is launched for the first time, the control panel of
ScanWizard EZ - EZ Mode appears on the screen automatically.
4. Click the Scan button to start scanning.
The ScanWizard EZ will detect the photo on the scanner glass surface first, next
automatically calibrate the scanner, crop the image, and perform the image scan
with factory settings. When done, the output image can be saved in a file and
delivered to the specified location.
Allows you to switch to
the Professional Mode
Allows you to switch to
the Advanced Mode
Allows you to activate the
Preferences window, which
contains selections
for image settings (i.e., file
format, resolution, scan quality)
Press the Scan button to
start scanning
Minimizes
ScanWizard EZ
Exits ScanWizard
EZ
ScanMaker i450 Supplement 11