Table of Contents
Advertisement
14
ScanMaker s430 Supplement
Scanning 35mm Slides
1. Raise the scanner lid, then place the EZ-Lock Film Holder on the glass surface,
with the slot for slides running down the center.
2. Place the 35mm slide to be scanned in the film holder, with the slide facing down.
3. Follow the procedures (steps 3 through 11) for scanning 35mm filmstrips to carry
out scanning.
Before performing step 5, click the Scan Material icon, and choose "Positive
Film". For Mac OS X, select "Positive" from the Scan Material drop-down menu.
Keep calibration strip on the
glass surface clear and free of any
obstruction
To make sure the auto multiframe
cropping feature performs correctly,
align the holder flush against the
front right edge of the scanner glass
surface.
Advertisement
Table of Contents
