Scanning Photos - Microtek ScanMaker i800 Plus Start Here Manual

How to Scan: Scanning Photos and Film

Scanning Photos

1. Position the photo on the upper glass bed, as detailed in the "Position the Scan Material" section
of the Start Here guide.
2. Launch ScanWizard Pro.
• If you are asked to calibrate your scanner, you can skip this section for now and come back
to it later. Or, if you wish to perform calibration, see the ScanMaker i800 Plus Supplement
for more details.
• If prompted to set up Color Matching, click OK for now to accept the settings. You can
always change the settings at a later time. For more details, see the ScanMaker i800 Plus
Supplement.
3. In the Preview window of ScanWizard Pro, choose Reflective from the Scan Material menu.
4. Click the Overview button in the Preview window to see a preliminary scan of the image.
5. Select the Scan Frame tool, and choose the area to be scanned by sizing the marquee around the
targeted area.
6. Specify your scanning requirements in the Settings window. Choose the desired image type and
resolution, and adjust the scan frame settings if necessary.
7. Adjust image quality if necessary, using the Advanced Image Correction tools.
8. Click the Scan (or "Batch") button in the Preview window to start scanning.
Window
Expansion button
Settings window
Preview window
5