Table of Contents
Advertisement
Scanning Photos
1.
Position the photo face down on the scanner glass surface
toward the front of the scanner, as detailed in the
"Positioning Reflectives" section in this guide.
2.
Launch ScanWizard Pro.
3.
In the Preview window of ScanWizard Pro, choose
Reflective from the Scan Material menu.
4.
Click the Overview button in the Preview window to see a
preliminary scan of the image.
5.
Select the Scan Frame tool, and choose the area to be
scanned by sizing the marquee around the targeted area.
6.
Specify your scanning requirements in the Settings
window. Choose the desired image type and resolution,
and adjust the scan frame settings if necessary.
7.
Adjust image quality if necessary, using the Advanced Image Correction tools.
8.
Click the Scan (or "Batch") button in the Preview window or on the scanner unit to start scanning.
Window
Expansion button
Settings window
8
Calibration strip
(Keep clear and
unobstructed)
Smart-Touch button (Scan)
Preview window
Advertisement
Table of Contents
