For Pc Users Using Scanwizard Ez; Scanning Photos (1) - Microtek ScanMaker i4800 Manual

For PC Users Using ScanWizard EZ

A. Scanning Photos (1)
This scenario uses the ScanWizard EZ - EZ Mode.
1. Raise the scanner lid, and place the photo to
2. Double-click the ScanWizard EZ icon on your desktop to launch ScanWizard
3. Click the Scan button to start scanning.
Allows you to switch to
the Professional Mode
Allows you to switch to
the Advanced Mode
Allows you to activate the
Preferences window, which
contains selections
for image settings (i.e., file
format, resolution, scan quality)
6 ScanMaker i4800 Supplement
be scanned face down on the scanner glass
surface. Position the top end of the photo
towards the right of the scanner, and then
lower the scanner lid on the scanner glass
surface.
Note: For the automatic cropping feature to work correctly during the
preview scan of your photo, make sure the scanner lid is completely flat and
closed over the scan bed before you launch ScanWizard EZ.
EZ.
When ScanWizard EZ is launched for the first time, the control panel of
ScanWizard EZ - EZ Mode appears on the screen automatically.
The ScanWizard EZ will detect the photo on the scanner glass surface first,
next automatically calibrate the scanner, crop the image, and perform the
image scan with factory settings. When done, the output image can be
saved in a file and delivered to the specified location.
Press the Scan button to
start scanning
Minimizes
ScanWizard EZ
Exits ScanWizard EZ