Scanning Photos - Microtek ScanMaker 9800XL Plus Start Here Manual

Basic Scanning for PC Users

Scanning Photos

1. Position the photo face down on the scanner glass surface,
towards the front of the scanner. Center the top along the U-
shaped ruler on the scanner.
2. Launch ScanWizard Pro.
If prompted to set up Color Matching, click OK for now to accept
the settings. You can always change the settings at a later time.
For more details, see the ScanMaker 9800XL Plus User Guide.
3. In the Preview window of ScanWizard Pro, choose Reflective
from the Scan Material menu.
4. Click the Overview button in the Preview window to see a preliminary scan of the image.
5. Select the Scan Frame tool, and choose the area to be scanned by sizing the marquee around the
targeted area.
6. Specify your scanning requirements in the Settings window. Choose the desired image type and
resolution, and adjust the scan frame settings if necessary.
7. Adjust image quality if necessary, using the Advanced Image Correction tools.
8. Click the Scan (or "Batch") button in the Preview window or on the scanner unit to start scanning.
Window
Expansion button
Settings window
Preview window
6
Smart-Touch button (Scan)