Advertisement
Basic Scanning for PC Users
Scanning Photos
1.
Position the photo face down on the scanner glass surface,
towards the front of the scanner. Center the top along the U-
shaped ruler on the scanner.
2.
Launch ScanWizard Pro.
•
If asked to calibrate your scanner, you can skip this section
for now and come back to it later. Or, if you wish to perform
calibration, see the ScanMaker 1000XL Plus User Guide in
your Microtek Software CD/DVD for more details.
•
If prompted to set up Color Matching, click OK for now to accept the settings. You can always
change the settings at a later time. For more details, see the ScanMaker 1000XL Plus User Guide
in your Microtek Software CD/DVD.
3.
In the Preview window of ScanWizard Pro, choose Reflective from the Scan Material menu.
4.
Click the Overview button in the Preview window to see a preliminary scan of the image.
5.
Select the Scan Frame tool, and choose the area to be scanned by sizing the marquee around the
targeted area.
6.
Specify your scanning requirements in the Settings window. Choose the desired image type and
resolution, and adjust the scan frame settings if necessary.
7.
Adjust image quality if necessary, using the Advanced Image Correction tools.
8.
Click the Scan (or "Batch") button in the Preview window or on the scanner unit to start scanning.
Window
Expansion button
Settings window
Preview window
6
Smart-Touch
button (Scan)
Advertisement
